Honda VFR 400 NC30 Early Type Damper Fork Tubes. Quality UK made fork tubes stanchions – x2 Qty Pair of
This is a replacement part for Genuine Honda OEM Part Number: 51410-MR8-003 or 51410MR8003 (This does not include Fork Bushes/Teflons)
IMPORTANT INFORMATION – PLEASE READ:
* Please ensure you are ordering the correct parts. Honda VFR400 NC30’s through the production run from approx 1988 to 1992/3 were fitted with x2 very different types of Forks. Visually they look the same. In order to tell the difference look at the Fork Tops. If they have a small brass adjustment screw for the cartridges, then this identifies them as ‘Late’ cartridge forks.
For replacement tubes for ‘late’ VFR 400 NC30 forks, please go to this page >
If the fork tops have a plain silver top with a flat headed adjuster and NO ‘brass adjuster screw’, then you have ‘Early Type’ Honda VFR 400 NC30 Early Type Damper Fork Tubes and you are on the correct page here for replacement tubes/stanchions.
Never go off the production year of the bike, people retro fit different forks so you must identify which forks you are rebuilding prior to order these parts. If in doubt, email us a photograph of your fork tops and we will identify them for you.
This is critical information. The dimensions of the tubes, oil ways and recesses for clips and bushes are completely different and hence the 2 tubes vary greatly.
*Please note: These are High Spec UK Manufactured Fork Tubes. They require the original OEM Original fork shuttles removing from the original fork tubes and transferring into the new fork tubes. The ends of the new fork tubes can then be peened over using a peening hammer. If you do not have the expertise to do this yourself, we would recommend getting a local bike workshop or suspension company to facilitate this for you.
**STRICTLY NO RETURNS ON THESE ITEMS AS THEY ARE SPECIAL ORDER FROM OUR UK MANUFACTURER.